|
|
|
Beltronics
|
Escort
|
|
|
|
|
|
|
|
|
|
|
|
Hypertech 62006 Max Energy Sport 2008-2009 Mitsubishi Lancer Evolution X
Retail Price $571.89
Your Price $449.99
You Save $121.90
|
AEM 21-678C 2008-2010 Mitsubishi Evo X 2.0L - L4 Turbo Lancer Evolution Cold Air Intake System Charcoal
Retail Price $393.11 *FREE SHIPPING*
Your Price $314.49 *FREE SHIPPING*
Sale Price $284.99 *Includes Free Ground Shipping*
You Save $108.12
|
|
|
|
Hypertech 62006 Max Energy Sport 2008-2009 Mitsubishi Lancer Evolution X
Max Energy Sport Power Programmer
Delivers The Maximum Tune
Max Energy Power Tuning extracts every bit of energy possible out of every molecule of fuel giving you more miles at part-throttle and more power at wide-open throttle. In order to increase engine efficiency, horsepower and torque, Hypertech's engineers first make hundreds of dyno runs to optimize the spark and air-fuel curves point by point over the entire rpm band from just off idle to wide open throttle. Next they take the vehicle with the new tune to the track and the street to verify real world performance gains. The results…maximum power, quicker acceleration, smoother shifting and better driveability.
The Max Energy Sport not only gives you the power you crave but also offers specific features for your make, model and year.
|
AEM 21-678C 2008-2010 Mitsubishi Evo X 2.0L - L4 Turbo Lancer Evolution Cold Air Intake System Charcoal
Charcoal
Approximate Power Gains: +17 HP / +17 TQ
|
|
|
|
|
|
A'PEXi 507-M009 Power Intake 2008+ Mitsubishi EVO X (CZ4A)
Retail Price $169.00
Your Price $160.55
You Save $8.45
|
A'PEXi 477-A903 Electronics Accessories Super Ground Stabilizer System
Retail Price $239.00 *FREE SHIPPING*
Your Price $227.05 *Includes Free Ground Shipping*
You Save $11.95
|
|
|
|
A'PEXi 507-M009 Power Intake 2008+ Mitsubishi EVO X (CZ4A)
- Dry Filter Element (non-oil), for increased air flow efficiency that improves throttle response and does not foul air flow sensors
- Easy install onto factory intake hose
- Includes hardware and heat shield
|
A'PEXi 477-A903 Electronics Accessories Super Ground Stabilizer System
Developed using innovative new concepts, the new A'PEXi Super Grounding System stabilizes electrical noise and voltage spikes. The Super Ground System maximizes electrical component efficiency by combining an electrical grounding system with a battery current and voltage stabilization control unit. The control unit features an electrical charging system and electrical noise filter. The double noise filter smoothes turbulent electrical current, providing a stable and consistent voltage flow to all your vehicles electrical devices. The A'PEXi Super Grounding System maximizes the efficiency of all factory vehicle electrical systems, allowing smoother engine operation, more efficient electrical component operation, and improved electrical current. The stylish voltage stabilizer box compliments any engine bay with its attractive case design and ominous backlit A'PEXi logo.
High capacity Double Condenser and Double Noise Filter
High purity, temperature resistant OFC cable (non-oxidized copper / oxygen free cable)
Copper wire diameter: 0.12mm X 665 utilizes inter-twined wire
|
|
|
|
|
|
ARK Design 07-0002M-L01 G700 High Performance Clutch System Twin Plate Lightened Flywheel Mitsubishi Evo X (CZ4A)
Your Price $2,299.00
|
ARK Design 07-0002M-S01 G700 High Performance Clutch System Twin Plate Standard Flywheel Mitsubishi Evo X (CZ4A)
Your Price $2,199.00
|
|
|
|
|
ARK Design 07-0002M-L01 G700 High Performance Clutch System Twin Plate Lightened Flywheel Mitsubishi Evo X (CZ4A)
|
ARK Design 07-0002M-S01 G700 High Performance Clutch System Twin Plate Standard Flywheel Mitsubishi Evo X (CZ4A)
|
|
|
|
|
|
APR Performance CW-411096 Mitsubishi Evo X with Factory Lip Carbon Fiber Wind Splitter With Rods
Your Price $340.00
|
APR Performance AB-491030 Mitsubishi Evo X Carbon Fiber Front Bumper Canard Set
Your Price $185.00
|
|
|
|
APR Performance CW-411096 Mitsubishi Evo X with Factory Lip Carbon Fiber Wind Splitter With Rods
To combat the effects of front end lift, APR Front Wind Splitters are utilized to give extra traction and control in the front of a car. By creating a high pressure area on top of the wind splitter, high pressure air flow is restricted to flow underneath a car. With low pressure below the car, the effect of lift is reduced and a driver can gain from the extra traction and control.
|
APR Performance AB-491030 Mitsubishi Evo X Carbon Fiber Front Bumper Canard Set
APR Front Bumper Canards are the perfect answer to aerodynamically tune the handling for the front of a car. Made of lightweight and durable carbon graphite composites, APR Front Bumper Canards help increase front downforce at high speeds. The added downforce stabilizes the cars chassis during hard cornering and increases traction for faster lap times.
|
|
|
|
|
|
APR Performance CF-410031 Mitsubishi Evo X Carbon Fiber Radiator Cooling Shroud
Your Price $360.00
|
APR Performance CF-410012 Mitsubishi Evo X Carbon Fiber Vortex Generator
Your Price $345.00
|
|
|
|
APR Performance CF-410031 Mitsubishi Evo X Carbon Fiber Radiator Cooling Shroud
The flow of air is not only limited to the outside of a car. To maximize cooling capabilities, a radiator needs a direct flow of air to allow an engine to maintain consistent temperatures on the race track. Because of structural gaps above the radiator, the flow of air could escape making the radiator not as efficient as it could be.
To help improve the flow of air into the radiator, APR Carbon Fiber Radiator Cooling Plates can be utilized to channel the flow of air directly to the radiator. This will improve the efficiency of the radiator while adding a high-tech, race inspired look to your engine bay.
|
APR Performance CF-410012 Mitsubishi Evo X Carbon Fiber Vortex Generator
The APR vortex generator assists the vehicles aerodynamics by providing additional down force at high speeds, reduces drag, increases velocity around the rear spoiler, and decreases the amount of lift.
|
|
|
|
|
|
APR Performance CW-489110 Mitsubishi Evo X w/o Factory Lip Carbon Fiber Wind Splitter With Rods
Your Price $340.00
|
APR Performance FA-410006 Mitsubishi Evo X Carbon Fiber Front Air Dam / Front Lip
Your Price $675.00
|
|
|
|
APR Performance CW-489110 Mitsubishi Evo X w/o Factory Lip Carbon Fiber Wind Splitter With Rods
To combat the effects of front end lift, APR Front Wind Splitters are utilized to give extra traction and control in the front of a car. By creating a high pressure area on top of the wind splitter, high pressure air flow is restricted to flow underneath a car. With low pressure below the car, the effect of lift is reduced and a driver can gain from the extra traction and control.
|
APR Performance FA-410006 Mitsubishi Evo X Carbon Fiber Front Air Dam / Front Lip
Underbody components such as front air dams, undertrays, and rear diffusers are essential for maximizing aerodynamic performance. The APR Performance Front Air Dam integrates with the factory front bumper to:
- Reduce lift.
- Increase front-end stability.
- Improve high-speed cornering grip
This Front Air Dam also utilizes a built-in aerodynamic splitter design that creates a high-pressure region of air atop the protruding surface, further reducing lift and increasing net downforce.
|
|
|
|
|
|
APR Performance AB-300011 Universal 8mm Wind Splitter Support Rods/pair
Your Price $55.00
|
APR Performance AB-300014 Universal 10mm Wind Splitter Support Rods/pair
Your Price $75.00
|
|
|
|
APR Performance AB-300011 Universal 8mm Wind Splitter Support Rods/pair
These support rods are used to reinforce the Front Wind Splitter. Comes with a pair of stainless steel support rods.
|
APR Performance AB-300014 Universal 10mm Wind Splitter Support Rods/pair
These support rods are used to reinforce the Front Wind Splitter. Comes with a pair of stainless steel support rods.
|
|
|
|
|
|
APR Performance AB-300018 Universal 10mm Extended Length Wind Splitter Support Rods/pair
Your Price $85.00
|
APR Performance AB-300019 Universal 10mm Quick Release Wind Splitter Support Rods/pair
Your Price $75.00
|
|
|
|
APR Performance AB-300018 Universal 10mm Extended Length Wind Splitter Support Rods/pair
These support rods are used to reinforce the Front Wind Splitter. Comes with a pair of stainless steel support rods.
|
APR Performance AB-300019 Universal 10mm Quick Release Wind Splitter Support Rods/pair
These support rods are used to reinforce the Front Wind Splitter. Comes with a pair of stainless steel support rods.
|
|
|
|
|
|
APR Performance AS-106740 Mitsubishi Evo X Carbon Fiber GTC-300 Wing 67 Inch Airfoil
Your Price $1,430.00
|
APR Performance AS-106140 Mitsubishi Evo X Carbon Fiber GTC-300 Wing 61 Inch Airfoil
Your Price $1,430.00
|
|
|
|
|
APR Performance AS-106740 Mitsubishi Evo X Carbon Fiber GTC-300 Wing 67 Inch Airfoil
|
APR Performance AS-106140 Mitsubishi Evo X Carbon Fiber GTC-300 Wing 61 Inch Airfoil
|
|
|
|
|
|
APR Performance AS-105940 Mitsubishi Evo X Carbon Fiber GTC-200 Wing 59.5 Inch
Your Price $785.00
|
APR Performance AA-100065 Spoiler Accessory 2 Inch Pedestal Risers for GTC-300 GTC-500 Wing
Your Price $75.00
|
|
|
|
|
APR Performance AS-105940 Mitsubishi Evo X Carbon Fiber GTC-200 Wing 59.5 Inch
|
APR Performance AA-100065 Spoiler Accessory 2 Inch Pedestal Risers for GTC-300 GTC-500 Wing
|
|
|
|
|
|
|
APR Performance AA-100066 Spoiler Accessory 3 Inch Pedestal Risers for GTC-300 GTC-500 Wing
Your Price $75.00
|
APR Performance AA-100228 Spoiler Accessory 2.5 Inch Pedestal Risers for GTC-200 EVO WRX Spec Wings
Your Price $95.00
|
|
|
|
|
APR Performance AA-100066 Spoiler Accessory 3 Inch Pedestal Risers for GTC-300 GTC-500 Wing
|
APR Performance AA-100228 Spoiler Accessory 2.5 Inch Pedestal Risers for GTC-200 EVO WRX Spec Wings
|
|
|
|
|
|
|
APR Performance AA-100100 Spoiler Accessory Wing Angle Indicator
Your Price $28.00
|
Carbign Craft CBX-EVOGRILL Mitsubishi Evo X Carbon Fiber Front Bumper Grill Bezel
Your Price $285.00
|
|
|
|
|
APR Performance AA-100100 Spoiler Accessory Wing Angle Indicator
|
Carbign Craft CBX-EVOGRILL Mitsubishi Evo X Carbon Fiber Front Bumper Grill Bezel
Add a touch of carbon fiber flair with the Carbign Craft Dry Carbon Grill Bezel. The carbon fiber weave brings an exotic racing look to your car. Each Carbign Craft product is designed for perfect fitment and utilizes fade resistant epoxy coating to reduce the effects of UV light.
|
|
|
|
|
|
Carbign Craft CBX-EVOHDSCP Mitsubishi Evo X Carbon Fiber Hood Scoop
Your Price $285.00
|
.
|
|
|
|
Carbign Craft CBX-EVOHDSCP Mitsubishi Evo X Carbon Fiber Hood Scoop
Add a touch of carbon fiber flair with the Carbign Craft Dry Carbon Hood Scoop. The carbon fiber weave brings an exotic racing look to your car. Each Carbign Craft product is designed for perfect fitment and utilizes fade resistant epoxy coating to reduce the effects of UV light.
|
|
|
|
|
|
|
Tanabe TUB139F Front Under Brace 4 Point Mitsubishi EvoX 2008 (CZ4A)
Your Price $198.00
|
ACT ME1-HDSS STREET CLUTCH KIT 2008+ Mitsubishi Evolution X GSR 5 Speed w/ Release Bearing
Retail Price $826.82
Your Price $782.32
You Save $44.50
|
|
|
|
Tanabe TUB139F Front Under Brace 4 Point Mitsubishi EvoX 2008 (CZ4A)
2008+ Mitsubishi Evolution X EvoX (CZ4A)
Often overlooked, especially on vehicles that are reaching higher levels of modification, is the importance of reinforcing the chassis. All vehicles experience flexing of the unibody under various handling loads. Twisting of the chassis is also very common on higher horsepower vehicles.
The SUSTEC UNDERBRACE prevents this unwanted behaviour by connecting specific points of the undercarriage to reinforce the chassis. Unique internal double-i-beam construction is highly rigid, and lightweight, so the chassis may be significantly reinforced without adding surplus weight.
Noticeable gains in balance and stability are gained after it's simple bolt on installation.
|
2008+ Mitsubishi Evolution X GSR 5 Speed
Street Clutch Kit
Heavy Duty Pressure Plate
Organic Disc
Torque Capacity: 512 FT/LBS
Clamp Load: 42%
*With Release Bearing after 08/08
|
|
|
|
|
|
ACT ME1-XTSS STREET CLUTCH KIT 2008+ Mitsubishi Evolution X GSR 5 Speed w/ Release Bearing
Your Price $881.82
|
Samco TCS383 Turbo Hose Kit (6) 2008+ Mitsubishi Evolution X
Your Price $200.73
|
|
|
|
2008+ Mitsubishi Evolution X GSR 5 Speed
Street Clutch Kit
Xtreme Duty Pressure Plate
Organic Disc
Torque Capacity: 573 FT/LBS
Clamp Load: 58%
*With Release Bearing after 08/08
|
Samco TCS383 Turbo Hose Kit (6) 2008+ Mitsubishi Evolution X
The Samco Sport hose kits are designed to replace original equipment in a wide range of performance vehicles, both in motorsport and fast road use.
|
|
|
|
|
|
Samco TCS383C Coolant Hose Kit (4) 2008+ Mitsubishi Evolution X
Your Price $352.94
|
ARC Front Mount Intercooler 2008+ Mitsubishi Evolution X
Your Price $1,740.00
|
|
|
|
Samco Sport TCS383C Coolant Hose Kit (4) 2008+ Mitsubishi Evolution X
The Samco Sport hose kits are designed to replace original equipment in a wide range of performance vehicles, both in motorsport and fast road use.
|
ARC ARC-AM073CZ4AG Front Mount Intercooler 2008+ Mitsubishi Evolution X
73MM Thick
|
|
|
|
|
|
ARC Intercooler Piping Kit 2008+ Mitsubishi Evolution X
Your Price $299.00
|
ARC Carbon Fiber Hood Inlet Cover 2008+ Mitsubishi Evolution X
Your Price $340.00
|
|
|
|
ARC ARC-AICPCZ4A Intercooler Piping Kit 2008+ Mitsubishi Evolution X
Aluminum Piping
|
ARC ARC-AEDCCZ4A Carbon Fiber Hood Inlet Cover 2008+ Mitsubishi Evolution X
|
|
|
|
|
|
ARC Super Induction Box 2008+ Mitsubishi Evolution X
Your Price $680.00
|
ARC Titanium Exhaust System 2008+ Mitsubishi Evolution X
Your Price $3,850.00
|
|
|
|
ARC ARC-AIDBCZ4A Super Induction Box 2008+ Mitsubishi Evolution X
Unpolished
|
ARC ARC-ATSCZ4A-A Titanium Exhaust System 2008+ Mitsubishi Evolution X
|
|
|
|
|
|
ARC Titanium Exhaust System 2008+ Mitsubishi Evolution X
Your Price $4,950.00
|
ARC Intake Suction Pipe Polished Aluminum 2008+ Mitsubishi Evolution X
Your Price $380.00
|
|
|
|
|
ARC ARC-ATSCZ4A-B Titanium Exhaust System 2008+ Mitsubishi Evolution X
|
ARC ARC-AAIPCZ4A Intake Suction Pipe Polished Aluminum 2008+ Mitsubishi Evolution X
|
|
|
|
|
|
ARC Intake Suction Pipe Titanium Etching Version 2008+ Mitsubishi Evolution X
Your Price $860.00
|
ARC Intake Suction Pipe Titanium Name Plate Version 2008+ Mitsubishi Evolution X
Your Price $995.00
|
|
|
|
|
ARC ARC-AAIPCZ4AEC ARC Intake Suction Pipe Titanium Etching Version 2008+ Mitsubishi Evolution X
|
ARC ARC-AAIPCZ4ANP ARC Intake Suction Pipe Titanium Name Plate Version 2008+ Mitsubishi Evolution X
|
|
|
|
|
|
ACT ME1-HDG6-B Race Clutch Kit 2008+ Mitsubishi Evolution X GSR 5 Speed
Your Price $788.33
Sale Price $743.83
You Save $44.50
|
ACT ME1-XTG6-B Race Clutch Kit 2008+ Mitsubishi Evolution X GSR 5 Speed
Your Price $843.33
Sale Price $798.83
You Save $44.50
|
|
|
|
2008+ Mitsubishi Evolution X GSR 5 Speed
Race Clutch Kit
Heavy Duty Pressure Plate
6 Puck Sprung Hub Race Disc
Torque Capacity: 655 FT/LBS
Clamp Load: 42%
*No Release bearing
|
2008+ Mitsubishi Evolution X GSR 5 Speed
Race Clutch Kit
Xtreme Duty Pressure Plate
6 Puck Sprung Hub Race Disc
Torque Capacity: 734 FT/LBS
Clamp Load: 58%
*No Release Bearing
|
|
|
|
|
|
ACT ME1-HDSS-B STREET CLUTCH KIT 2008+ Mitsubishi Evolution X GSR 5 Speed
Retail Price $826.82
Your Price $737.82
You Save $89.00
|
ACT ME1-XTSS-B STREET CLUTCH KIT 2008+ Mitsubishi Evolution X GSR 5 Speed
Your Price $881.82
Sale Price $837.00
You Save $44.82
|
|
|
|
2008+ Mitsubishi Evolution X GSR 5 Speed
Street Clutch Kit
Heavy Duty Pressure Plate
Organic Disc
Torque Capacity: 512 FT/LBS
Clamp Load: 42%
*No Release bearing
|
2008+ Mitsubishi Evolution X GSR 5 Speed
Street Clutch Kit
Xtreme Duty Pressure Plate
Organic Disc
Torque Capacity: 573 FT/LBS
Clamp Load: 58%
*No Release Bearing
|
|
|
